Whirlpool Cabrio Washer Sounds Like Jet Engine [Why & Solutions]

Whirlpool is a popular brand. It is popular because provided quality performance. But, sometimes this brand of washer produces annoying sounds. Even, the sound looks like a jet engine sound. You may know that a jet engine produces extremely annoying noise.

The Whirlpool Cabrio washer sounds like a jet engine because of the ball-bearing damage. Moreover, the support drum goes bad which is another reason to produce this type of noise. Besides these issues, your washer produces jet engine type of noise because of overloading, wrong laundry, clogged vent, drain pump fault, etc.

The main culprit is bad bearing. But, I found some other core problems which you also need to overlook. So, let’s dive in to know the detailed answer.

Whirlpool Cabrio Washer Sounds Like Jet Engine

Quick Troubleshooting Guide for Whirlpool Cabrio Washer Sounds Like Jet Engine

Do you don’t have enough time to read the detailed answer? Don’t worry; I make a simple and quick chart for you. It helps you to get quick solutions.

Issues NameQuick Solutions
Bad Ball BearingReplace it with a new one or find out the problems to fix it
Wrong Laundry TypeTry to avoid washing rugs, door mats, bulky staff, and electric fabric
Washer OverloadRemove excess laundry products to avoid this problem
Clogged VentRemoved clogged vent
High-Speed SpinReduce high-speed spin 600-1800 rpm
Obstructive MaterialsTry to fix loosen screws, nuts, pins, zippers, and others
Excess SoundDon’t put excess detergent and other chemicals
Drain Pump MalfunctionAlways keep the drain pump clean to avoid this issue
Worn Out GasketIf possible, you should replace the gasket
Defective Washer BeltReplace a damaged, frail, or you can lose the belt
Keep CleaningAlways keep cleaning your washer to get better performance

Whirlpool Cabrio Washer Sounds Like Jet Engine

There are plenty of reasons worked here. I hope that the above quick solutions and reasons help you with this matter.

Now, I am going to share with you some of the core reasons and effective solutions. After applying the following steps, you will easily fix your Whirlpool Cabrio washer sounds which are like a jet engine.

Note: I share my personal experience and also take 4-persons help who already have faced this problem.

Why Whirlpool Cabrio Washer Produces Sound Like Jet Engine? [Effective Solutions]

1. Bad Ball Bearing

This is the top and vital reason which produces your washer like a jet engine. It is truly sucked and annoying to hear this type of noise. This problem comes out because of rust which comes from detergent and adjusts with water.

In overtimes, the ring wears out and disconnects from the main function of the washer. So, they struggle with other material and produces extreme noise. So, how can you fix this problem?

Solutions

There are two ways you can fix this problem. First, you can apply grease when the bearing is rusty. Second, you can replace the balls of the bearing. If the jet sound still comes out, you should replace the previous one with a new one.

2. Wrong Laundry Type

The wrong laundry type is another reason that you need to fix. Wrong laundry means putting in electric blankets, rugs, door mats, and other things.

You can check out the user manual to know all of the elements which are the wrong laundry type. If you put these elements on the Whirlpool washer, you may hear the annoying jet engine noise.

Solution

First, check out the user manual to know which things you can’t put on the washer. Second, avoid putting in electric blankets, rugs, door mats, and others.

3. Washer Overload

When the washer overloads, it fails to spin and produces bad noise. If you want to continuously overload your washer, the washer produces extreme noise which looks like jet engine noise.

Whirlpool provided this noise name grinding noise. Now, the question is, how to fix this problem?

Solution

You can fix this problem to avoid loading extra elements. Try to reduce some fabrics or clothes or other things to avoid this type of problem.

4. Obstructive Metal Objects

This is a very important factor in getting the perfect wash and avoid any type of noise. Obstructive metal objects mean loosening metal like screws, nuts, and others.

When the pins, screws, nuts, bolts, and other obstructive metal objects are loosened, you will get weird noises which are truly annoying.

5. Excess Suds

This is another core reason that faced Mr John a neighbour of mine. He told me that too much sud is not good for the washer. It produces bad noise and also damages several parts of the washer.

Solution

Try to avoid over-suffing to protect your Whirlpool washer. Moreover, only used the detergent recommended by the Whirlpool manufacturer.

6. Clogged Vent

The clogged vent is always harmful to the spin of a washer. For this reason, it produces bad annoying noise. Sometimes the noise picks up and it looks like jet engine noise.

The vent helps the washer to keep cool and work properly. So, you have to focus on this section to avoid the clogging problem.

Solution

To fix this problem, you have to remove the clogged vent. You can use vinegar and white soda to remove the clog. On the other hand, you will also get several chemicals from the market which are also capable of cleaning the vent from being clogged.

7. Check Out Drain Pump

Drain pump malfunction is another reason which created several problems especially producing annoying noise. So, you should check out the drain system whether it is clean or not.

Solutions

First of all, clean the drain pump and secondly, you need to remove all of the uncertain things from the pump to work properly.

8. Worn Out Gasket

Typically, the gasket is a rubber seal which works to prevent water leakage. If the gasket is worn out the water easily comes out and the sound is produced without any doubts.

Solutions

You should replace it with a new one. Because the gasket is not expensive and it is hard enough to repair. Make sure that you consider a branded gasket to get long-term performance.

Should You Hire a Professional To Fix This Problem?

Whirlpool always tries to provide the best product to its users. But, sometimes uncertain problems come out and noise is one of them. It is hard enough to say one reason and solution to fix the problem.

However, you can apply the above reasons and methods to fix the problem. If you think that it is tricky for you, you can take the following steps.

First, if your Whirlpool has a warranty, you can claim a warranty from the Whirlpool website or go near the dealership to fix the problem. Sometimes they charge a small amount of money based on the issues.

Second, you can contact your nearest repair shop to fix the problem. To fix this type of sound problem, they may charge $50 to $100 (Based on user experience).

Tips to Avoid Whirlpool Cabrio Washer Sound Problem in Future

Tips to Avoid Whirlpool Cabrio Washer Sound Problem in Future
  • Avoid Using Excess Detergent: Never use excess detergent on the washer. Because, after a time, your washer becomes clogged and produces noise.
  • Clean Drain Pump: Keep cleaning your washer drain pump to avoid jet engine noise.
  • Read User Manual: Before using the washer, you should read out user manual properly.
  • Overloaded: Never wash over fabrics or other things because it damages your washer and produces annoying noise.

These are pro tips for you so that you can avoid jet engine-type noise from your washer in future. I strongly believe that these tips help you a lot and the above solutions help you to fix the issues.

FAQs (Frequently Ask Questions)

Q: Why does my Whirlpool washing machine sound like a jet engine?

Answer: There are plenty of reasons worked which produces Whirlpool washing machine sounds like a jet engine. For example, worn gaskets, ball-bearing issues, vent clogs, and so on. The above list helps you to get a detailed answer about this matter.

Q: Why is my Whirlpool Cabrio washer so loud?

Answer: If your Whirlpool Cabrio washer becomes so loud, it means that ball-bearing comes with some problems. Moreover, worn gaskets, clogged vents, and other problems also produce this noise.

Q: Why Does My Whirlpool Washer Make a Whining Sound?

Answer: Sometimes Whirlpool washer makes a whining sound because of the drump support issue. Another core reason is the ball-bearing problem. Typically, you will find these problems and need to fix them to avoid whining sound issues.

Q: What to Do If Your Washer Is Making a Loud Noise?

Answer: If your washer making a loud noise, you have to find out the exact problem first and then need to fix the problem. Most of the time, the ball-bearing problem produces loud noise which you need to fix.

Is that clear to You?

The washer is a sensitive machine. If you use them properly, you can use this machine for a long time. Sometimes, a Whirlpool washer produces bad noise like a jet engine because of several reasons.

Most probably, ball-bearling, gasket worn out, vent clogged, and some other problems worked here. You have to find out the exact problems from the above list and fix them as soon as possible.

Resources:

  1. https://www.whirlpool.com/
  2. https://www.sloanappliance.com/whirlpool-washer-making-loud-noise-when-spinning/

Leave a Comment