Whirlpool Cabrio Washer Lid Lock Reset | Core Reasons & Effective Solutions

When you face your Whirlpool Cabrio washer lid lock reset problem, you can claim your warranty (if you have one). Undoubtedly, you can avoid the cost and save your time to claim the warranty. But, what can you do when you don’t have any warranty?

This article helps you to get quick solutions and detailed solutions so that you can fix this problem. I shared my personal experience and also included 2 existing users experience who already face this problem.

Whirlpool Cabrio washer lid lock reset

Key Points

This section helps you to get the key points which you get from this article. Let’s divine it.

  • I will provide you with easy tips and tricks to find out the exact problem and fix the problem without spending much cost.
  • Understanding the lid lock of the Whirlpool Cabrio.
  • I am going to cover troubleshooting and help you to prevent this problem in future.
  • If this problem still comes out after following the solutions, it would be better for you to contact professional plumbers.

Read More: Whirlpool Cabrio washer sounds like jet engine | Reasons & Effective solutions

Understanding Whirlpool Lid Lock Mechanism

Before finding the issues and solutions, it is essential for a person to know how the Whirlpool lid lock works. The lid lock is a safety feature which helps the machine to prevent operating.

Moreover, the lid lock is also ready to protect the washing machine cycle from injuries and accidents. The manufacturer of the washer used this sensor to detect when the lid was closed.

It has a magnetic sensor. When the lid shuts, the sensor sends a signal to control the board. When the lid stops, the washer automatically stops working and avoids any accidents and injuries.

Now, it is clear to you, how Whirlpool Cabrio and other lid lock washers worked. It is mandatory for washing machine users to fix the lid lock problem.

Components of Lid Lock Whirlpool Cabrio Machine

Magnetic SensorA magnetic sensor helps the machine to detect if the lid is closed or engaged.
Lid Lock SwitchLid locked switch workeds to detect when lids send any signals.
StickerThe Sticker worked for the washer latch which engaged with
Lid Lock LatchTypically, the latch slides into the place over the sticker to hold the lid closed.

Why Did the Whirlpool Cabrio Washer Lid Lock Problem Come Out?

Why Did the Whirlpool Cabrio Washer Lid Lock Problem Come Out

Before troubleshooting the problems, you have to know the causes and keep in mind them so that you can avoid these types of problems in future.

  • Sensor Issue

Because of lid lock failure, the sensor comes with malfunctions and stops working. If the sensor can’t detect whether the lid is open or closed, it doesn’t work without any doubts.

Sensor problems come out when the sensor comes with dirt, dust, dirty things, and so on. On the other hand, your washer faces a sensor issue because of an electric problem.

  • Wrong Uses

When you use your Whirlpool Cabrio in the wrong way, it is true that your washer comes with a lid lock problem. Because a lid lock is a type of sensor programmed for working.

Over-pressure is another cause for the washer. The lid lock stops working when they can’t detect the signals.

  • Wiring Problem

If your washer comes with a loose or disconnecting problem, undoubtedly, you will face a lid lock problem. When the wiring problem comes out, your washer can’t send or receive any signals which is a major problem for lid lock.

  • Mechanical Problems

Mechanical part problems mean loosening nuts, screws, lower adjustment and so on. This problem not only created a lid lock issue but also created washer-damaged problems and also created noise.

Whirlpool Cabrio Washer Lid Lock Reset (Troubleshooting)

Now, it is time to fix the problem. Don’t panic if you face this problem. Follow the below guide to reset lid lock problem without facing any issues.

  1. Check Power Supply: First, you have to check the power supply. Especially, you need to check out the plug properly. Because the loose plug may cause this problem.
  2. Inspect Lid Lock Switch: If you find the switch is faulty, you should remove the switch and a new one.
  3. Wiring Issues: From plugged to inside the power wire section of the washer, you need to inspect them properly. If you find any burn smell or leak, you need to repair the wire instantly.
  4. Reset the Control Board: If you think that all of the above problems are fixed, you need to reset the control board. You will get the step-by-step guide to reset your washer from the user manual.
  5. Replace the Control Board: If you think that the control board is not working properly and the functions are missing, you should replace the control board with a new one.

These 5 solutions help you to get a Whirlpool Cabrio washer lid lock reset manual and reset your Whirlpool Cabrio washer lid lock without hiring any experts. You just need to complete it one by one until the problem is fixed properly.

Fixing a Lid Lock That Won’t Engage

The common cause is that your washer lid lock is not engaged because it is near to end of the era. But, you can take some proper steps to fix this problem without spending much time.

Faulty Lid Lock Latch

This is the main cause that the lid lock is not engaged. Check out your latch so that it doesn’t damage and you don’t get any worn issues from the latch. If the latch is broken, you have to fix it.

Lid Wiring Problem

This is another problem the lid lock is not engaged. You should check out the wire connection properly. Especially, you need to check out the power supply wire. If you find any disconnect or damaging problem, you need to fix it as soon as possible.

Malfunctioning Control Board

This problem was not only caused by a lid lock engagement problem but also created a lid lock stuck problem. So, you have to check out your control board and all of the steps. If you find this problem, it would be better for you to fix the problem.

Preventing Future Lid Lock Problems

Preventing Whirlpool Cabrio washer lid lock problems means saving cost, and time-saving, and avoiding frustration. Your only a few steps help you to save the Whirlpool Cabrio washer from lid lock problems in future.

Regular Maintenance

Clean the lid lock regularly. Though there are no written rules for the exact time, you can clean the lid for at least a month or a week. I clean my lid lock every month which helps me to get better performance.

Avoid Overloading

Note, that overloading not only kills your lid lock but also kills your washer machine. It should be strongly followed to avoid overloading. You need to put enough weight your manufacturer told you.

Electrical Safety

Make sure that your washer comes with a proper electrical system. You have to put a piece of wood or a non-electric element under the washer. On the other hand, use an adapter so that your washer always gets proper eclectic power.

When Should You Call for Professional Assistance

Based on my experience and research, I strongly believe that the above solutions are enough to fix the problem. But, if you are failed and can’t understand how to fix the problem, you should call for professional assistance to fix the problem.

The following points also help you to understand whether you should call an assistant or not.

  • If your washer has a warranty, you should claim it first
  • If you are professional about this matter, you should avoid calling an assistance
  • When you are comfortable to fix wires, tight screws, and some other issues
  • You can call for assistance when you don’t have enough tools, experience, and fear to touch the machine.

These points are enough to understand for a person whether he should call a professional assistance or not.

FAQs (Frequently Ask Questions)

Q: How do you reset a Whirlpool Cabrio top load washer?

Answer: You can reset a Whirlpool Cabrio top load washer to check out some facts. First of all, you need to check out the sensor. Because top load washer always comes with this problem. If the sensor comes with malfunctions, you should fix this problem.

Q: How do you bypass the lid lock on a Whirlpool Cabrio washer?

Answer: You can bypass the lid lock on a Whirlpool Cabrio washer to find the exact problem first. For example, bad sensors, wiring issues, electrical problems, and some other issues created this problem. You need to check out one by one and fix the problem.

Q: How do I reset the code on my Whirlpool Cabrio washer?

Answer: To get the code for resetting your Whirlpool Cabiro washer, you need to check out the user manual. It helps you to get multiple codes and detailed answers to fix the problem. If you are unable to get the code, you can contact with Whirlpool manufacturer.

Q: What should I do if the lid lock on my Whirlpool Cabrio washer won’t engage?

Answer: If your Whirlpool Cabrio washer lid lock is not engage problem, you should check out the lid lock again. If the lid lock is damaged, you need to add a new one. On the other hand, you should also check out the wire system, sensor, and others.

Still Confused? What Should You Do?

If you are still confused after applying the above method, you can call for professional assistance. On the other hand, you can claim the warranty to save your money and get professional trusted service.

Note, the above causes and solutions I share with you from my personal experience and also added some existing users’ experience.


  • https://www.whirlpool.com/owners.html
  • https://www.wikihow.com/Bypass-the-Lid-Lock-on-a-Whirlpool-Washer
  • https://www.youtube.com/watch?v=FoYqAudXPuY

Leave a Comment